Heading 7214
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
47 tariff items under this heading · Chapter 72 — Iron and steel
7214.10.00.00Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - ForgedMFN Free7214.20.00Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rollingMFN Free7214.20.00.11Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a maximum yield point of 400MPaMFN Free7214.20.00.12Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 400MPa but not exceeding 500MPaMFN Free7214.20.00.13Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 500MPa but not exceeding 600MPaMFN Free7214.20.00.14Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 600MPaMFN Free7214.20.00.21Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a maximum yield point of 400MPaMFN Free7214.20.00.22Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPaMFN Free7214.20.00.23Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 500MPa but not exceeding 600MPaMFN Free7214.20.00.24Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 600MPaMFN Free7214.20.00.31Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a maximum yield point of 400MPaMFN Free7214.20.00.32Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPaMFN Free7214.20.00.33Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 500MPa but not exceeding 600MPaMFN Free7214.20.00.34Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 600MPaMFN Free7214.20.00.90Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - OtherMFN Free7214.30.00Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steelMFN Free7214.30.00.10Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Containing by weight 0.15% or more but not exceeding 0.35% of lead or 0.05% or more but not exceeding 0.4% of bismuth, for use in Canadian manufacturesMFN Free7214.30.00.24Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width not exceeding 76 mmMFN Free7214.30.00.25Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width exceeding 76 mm but less than 152 mmMFN Free7214.30.00.26Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width of 152 mm or moreMFN Free7214.30.00.33Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Rounds: - Of a diameter not exceeding 76 mmMFN Free7214.30.00.34Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Rounds: - Of a diameter exceeding 76 mmMFN Free7214.30.00.40Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - HexagonsMFN Free7214.30.00.50Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - SquaresMFN Free7214.30.00.90Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - OtherMFN Free7214.91.00Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-sectionMFN Free7214.91.00.11Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon:
- Of a width not exceeding 76 mmMFN Free7214.91.00.12Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon:
- Of a width exceeding 76 mm but less than 152 mmMFN Free7214.91.00.13Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight less than 0.25% of carbon:
- Of a width of 152 mm or moreMFN Free7214.91.00.21Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon:
- Of a width not exceeding 76 mmMFN Free7214.91.00.22Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon:
- Of a width exceeding 76 mm but less than 152 mmMFN Free7214.91.00.23Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.25% or more but less than 0.6% of carbon:
- Of a width of 152 mm or moreMFN Free7214.91.00.31Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon:
- Of a width not exceeding 76 mmMFN Free7214.91.00.32Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon:
- Of a width exceeding 76 mm but less than 152 mmMFN Free7214.91.00.33Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Of rectangular (other than square) cross-section - Containing by weight 0.6% or more of carbon:
- Of a width of 152 mm or moreMFN Free7214.99.00Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - OtherMFN Free7214.99.00.20Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - HexagonsMFN Free7214.99.00.30Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - SquaresMFN Free7214.99.00.41Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon:
- Rounds, of a diameter of less than 76 mmMFN Free7214.99.00.42Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon:
- Rounds, of a diameter of 76 mm or more but not exceeding 152 mmMFN Free7214.99.00.43Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon:
- Rounds, of a diameter exceeding 152 mmMFN Free7214.99.00.49Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon:
- OtherMFN Free7214.99.00.51Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon:
- Rounds, of a diameter of less than 76 mmMFN Free7214.99.00.52Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon:
- Rounds, of a diameter of 76 mm or more but not exceeding 152 mmMFN Free7214.99.00.53Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon:
- Rounds, of a diameter exceeding 152 mmMFN Free7214.99.00.59Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.25% or more but less than 0.6% of carbon:
- OtherMFN Free7214.99.00.60Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight 0.6% or more of carbonMFN Free