HS Code 7214.99.00.49
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon: - Other
Most Favoured Nation (MFN) Rate
Free
About HS Code 7214.99.00.49
HS code 7214.99.00.49 is a Canadian 10-digit tariff item covering Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon: - Other. It falls under Chapter 72 — Iron and steel of the Canadian Customs Tariff, within heading 7214 and subheading 7214.99. This code is used by the Canada Border Services Agency (CBSA) to determine customs duties, taxes, and regulatory compliance when you import into Canada.
The MFN (Most Favoured Nation) duty rate for 7214.99.00.49 is Free. This means no customs duty is charged regardless of the country of origin, though GST/HST and other applicable taxes still apply. 22 preferential trade agreements are available for this code, of which 22 offer duty-free access (for example: Australia Tariff, New Zealand Tariff, Commonwealth Caribbean Countries Tariff, Least Developed Country Tariff, General Preferential Tariff).
Key trade agreement eligibility: CUSMA (USA, Mexico) duty-free · CETA (EU) duty-free · CPTPP (Asia-Pacific) duty-free.
Example Calculation for 7214.99.00.49
If you import CAD $10,000 worth of goods classified under HS code 7214.99.00.49 into Canada (without a preferential trade agreement), here is the approximate cost breakdown:
| Value for Duty (VFD) | $10,000 |
| MFN Duty (Free) | $0 |
| GST (5%) | $500 |
| Total Landed Cost (approx.) | $10,500 |
Illustrative example. Does not include surtaxes, SIMA, excise duties, freight, provincial HST/PST, or trade-agreement exemptions. Use our calculator for an exact figure.
Frequently Asked Questions about HS Code 7214.99.00.49
What is HS code 7214.99.00.49?
HS code 7214.99.00.49 is a Canadian 10-digit tariff item used by the Canada Border Services Agency (CBSA) to classify imports of "Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other: - Other - Other, containing by weight less than 0.25% of carbon: - Other". It sits under Chapter 72 (Iron and steel) of the Canadian Customs Tariff.
What is the Canadian import duty rate for 7214.99.00.49?
Imports classified under HS code 7214.99.00.49 are duty-free at the MFN (Most Favoured Nation) rate. You still pay GST/HST and other applicable taxes. Use our calculator to see the full landed cost.
Can I import 7214.99.00.49 duty-free from the USA or Mexico under CUSMA?
Yes. HS code 7214.99.00.49 is duty-free under the Canada-United States-Mexico Agreement (CUSMA) when the goods originate in the US or Mexico and you provide a valid certification of origin. GST/HST still applies on import.
Does CETA apply to HS code 7214.99.00.49?
Yes. Imports of HS code 7214.99.00.49 from the European Union enter Canada duty-free under the Canada-EU Comprehensive Economic and Trade Agreement (CETA) with a valid origin declaration from the EU exporter.
What surtaxes or SIMA duties apply to HS code 7214.99.00.49?
Our calculator automatically checks retaliatory surtaxes (US steel & aluminum, Chinese EVs, etc.) and SIMA anti-dumping duties for 7214.99.00.49. Enter the country of origin in the calculator to see the complete list of duties that apply to your shipment.
Is this the right code for your product?
Our free AI classifier uses CBSA’s GRI rules to confirm or correct your classification.
Ask the AI chatPreferential Rates by Trade Agreement
22 applicable trade agreements
| Code | Trade Agreement | Rate |
|---|---|---|
| AUT | Australia Tariff | Free |
| CCoFTA | Canada-Colombia Free Trade Agreement | Free |
| CEPT | Canada-EFTA Preferential Tariff | Free |
| CETA | Canada-EU Comprehensive Economic and Trade Agreement | Free |
| CHFTA | Canada-Honduras Free Trade Agreement | Free |
| CIAT | Canada-Israel Agreement Tariff | Free |
| CJFTA | Canada-Jordan Free Trade Agreement | Free |
| CKFTA | Canada-Korea Free Trade Agreement | Free |
| CPaFTA | Canada-Panama Free Trade Agreement | Free |
| CPFTA | Canada-Peru Free Trade Agreement | Free |
| CUKTCA | Canada-United Kingdom Trade Continuity Agreement | Free |
| CT | Chile Tariff | Free |
| CCCT | Commonwealth Caribbean Countries Tariff | Free |
| CPTPP | Comprehensive and Progressive Trans-Pacific Partnership | Free |
| CRT | Costa Rica Tariff | Free |
| GPT | General Preferential Tariff | Free |
| IT | Iceland Tariff | Free |
| LDCT | Least Developed Country Tariff | Free |
| MT | Mexico Tariff | Free |
| NZT | New Zealand Tariff | Free |
| UAT | Ukraine Tariff | Free |
| UST | United States Tariff | Free |
Calculate import duties for HS code 7214.99.00.49
Get a complete duty, tax, and fee calculation for HS code 7214.99.00.49, including surtaxes, GST/HST, and provincial taxes.
Open CalculatorRelated Guides
Related HS Codes
Other codes under chapter 72
| HS Code | Description | MFN Rate |
|---|---|---|
| 7214.10.00.00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Forged | Free |
| 7214.20.00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | Free |
| 7214.20.00.11 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a maximum yield point of 400MPa | Free |
| 7214.20.00.12 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 400MPa but not exceeding 500MPa | Free |
| 7214.20.00.13 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 500MPa but not exceeding 600MPa | Free |
| 7214.20.00.14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: - With a minimum yield point greater than 600MPa | Free |
| 7214.20.00.21 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a maximum yield point of 400MPa | Free |
| 7214.20.00.22 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPa | Free |
| 7214.20.00.23 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 500MPa but not exceeding 600MPa | Free |
| 7214.20.00.24 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: - With a minimum yield point greater than 600MPa | Free |
| 7214.20.00.31 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a maximum yield point of 400MPa | Free |
| 7214.20.00.32 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 400MPa but not exceeding 500MPa | Free |
| 7214.20.00.33 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 500MPa but not exceeding 600MPa | Free |
| 7214.20.00.34 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: - With a minimum yield point greater than 600MPa | Free |
| 7214.20.00.90 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling - Other | Free |
| 7214.30.00 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel | Free |
| 7214.30.00.10 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Containing by weight 0.15% or more but not exceeding 0.35% of lead or 0.05% or more but not exceeding 0.4% of bismuth, for use in Canadian manufactures | Free |
| 7214.30.00.24 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width not exceeding 76 mm | Free |
| 7214.30.00.25 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width exceeding 76 mm but less than 152 mm | Free |
| 7214.30.00.26 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Other, of free-cutting steel - Flat bars, including flat grader blade sections: - Of a width of 152 mm or more | Free |