Chapter 72 - Iron and steel
627 tariff codes in this chapter, across 29 headings
Browse by heading
Each heading groups its 10-digit tariff items.
- 72013 itemsPig iron and spiegeleisen in pigs, blocks or other primary forms. - Alloy pig iron; spiegeleisen
- 720215 itemsFerro-alloys. - Ferro-chromium: - Containing by weight more than 4% of carbonNote: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies.
- 72032 itemsFerrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. - Ferrous products obtained by direct reduction of iron ore
- 720414 itemsFerrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other
- 72053 itemsGranules and powders, of pig iron, spiegeleisen, iron or steel. - Granules
- 72062 itemsIron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). - Ingots
- 720713 itemsSemi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon
- 720861 itemsFlat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - In coils, not further worked than hot-rolled, with patterns in relief
- 720913 itemsFlat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. - In coils, not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm
- 721023 itemsFlat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. - Electrolytically plated or coated with zinc
- 721110 itemsFlat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. - Not further worked than cold-rolled (cold-reduced): - Containing by weight less than 0.25% of carbon
- 721222 itemsFlat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. - Clad
- 721327 itemsBars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 721447 itemsOther bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
- 721513 itemsOther bars and rods of iron or non-alloy steel. - Of free-cutting steel, not further worked than cold-formed or cold-finished
- 721653 itemsAngles, shapes and sections of iron or non-alloy steel. - Angles, shapes and sections, not further worked than cold-formed or cold-finished: - Obtained from flat-rolled products
- 721786 itemsWire of iron or non-alloy steel. - Not plated or coated, whether or not polished
- 72185 itemsStainless steel in ingots or other primary forms; semi-finished products of stainless steel. - Ingots and other primary forms
- 721926 itemsFlat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than cold-rolled (cold-reduced): - Of a thickness exceeding 1 mm but less than 3 mm
- 72206 itemsFlat-rolled products of stainless steel, of a width of less than 600 mm. - Not further worked than cold-rolled (cold-reduced)
- 72216 itemsBars and rods, hot-rolled, in irregularly wound coils, of stainless steel.
- 722228 itemsOther bars and rods of stainless steel; angles, shapes and sections of stainless steel. - Angles, shapes and sections
- 722313 itemsWire of stainless steel.
- 72242 itemsOther alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. - Ingots and other primary forms
- 722527 itemsFlat-rolled products of other alloy steel, of a width of 600 mm or more. - Of silicon-electrical steel: - Grain-oriented
- 722614 itemsFlat-rolled products of other alloy steel, of a width of less than 600 mm. - Of high speed steel
- 722716 itemsBars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of high speed steel
- 722859 itemsOther bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Angles, shapes and sections
- 722918 itemsWire of other alloy steel. - Of silico-manganese steel
| HS Code | Description | MFN Rate |
|---|---|---|
| 7201.10.00.00 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. - Non-alloy pig iron containing by weight 0.5% or less of phosphorus | Free |
| 7201.20.00.00 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. - Non-alloy pig iron containing by weight more than 0.5% of phosphorus | Free |
| 7201.50.00.00 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. - Alloy pig iron; spiegeleisen | Free |
| 7202.11.00.00 | Ferro-alloys. - Ferro-manganese: - Containing by weight more than 2% of carbon | Free |
| 7202.19.00.00 | Ferro-alloys. - Ferro-manganese: - Other | Free |
| 7202.21.00.00 | Ferro-alloys. - Ferro-silicon: - Containing by weight more than 55% of silicon | Free |
| 7202.29.00.00 | Ferro-alloys. - Ferro-silicon: - Other | Free |
| 7202.30.00.00 | Ferro-alloys. - Ferro-silico-manganese | Free |
| 7202.41.00.00 | Ferro-alloys. - Ferro-chromium: - Containing by weight more than 4% of carbonNote: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies. | Free |
| 7202.49.00.00 | Ferro-alloys. - Ferro-chromium: - OtherNote: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies. | Free |
| 7202.50.00.00 | Ferro-alloys. - Ferro-silico-chromium | Free |
| 7202.60.00.00 | Ferro-alloys. - Ferro-nickel | Free |
| 7202.70.00.00 | Ferro-alloys. - Ferro-molybdenum | Free |
| 7202.80.00.00 | Ferro-alloys. - Ferro-tungsten and ferro-silico-tungsten | Free |
| 7202.91.00.00 | Ferro-alloys. - Other: - Ferro-titanium and ferro-silico-titanium | Free |
| 7202.92.00.00 | Ferro-alloys. - Other: - Ferro-vanadium | Free |
| 7202.93.00.00 | Ferro-alloys. - Other: - Ferro-niobium | Free |
| 7202.99.00.00 | Ferro-alloys. - Other: - Other | Free |
| 7203.10.00.00 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. - Ferrous products obtained by direct reduction of iron ore | Free |
| 7203.90.00.00 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. - Other | Free |
| 7204.10.00.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of cast iron | Free |
| 7204.21.00.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of alloy steel: - Of stainless steel | Free |
| 7204.29.00.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of alloy steel: - Other | Free |
| 7204.30.00.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Waste and scrap of tinned iron or steel | Free |
| 7204.41.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | Free |
| 7204.41.00.10 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles - No.1 in bundles | Free |
| 7204.41.00.20 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles - Other turnings and shavings | Free |
| 7204.41.00.90 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles - Other | Free |
| 7204.49.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other | Free |
| 7204.49.00.10 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - No. 1 heavy melting | Free |
| 7204.49.00.20 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - No. 2 heavy melting | Free |
| 7204.49.00.91 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - Other: - Shredded | Free |
| 7204.49.00.99 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Other waste and scrap: - Other - Other: - Other | Free |
| 7204.50.00.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. - Remelting scrap ingots | Free |
| 7205.10.00.00 | Granules and powders, of pig iron, spiegeleisen, iron or steel. - Granules | Free |
| 7205.21.00.00 | Granules and powders, of pig iron, spiegeleisen, iron or steel. - Powders: - Of alloy steel | Free |
| 7205.29.00.00 | Granules and powders, of pig iron, spiegeleisen, iron or steel. - Powders: - Other | Free |
| 7206.10.00.00 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). - Ingots | Free |
| 7206.90.00.00 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). - Other | Free |
| 7207.11.00 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness | Free |
| 7207.11.00.10 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness - Of iron | Free |
| 7207.11.00.21 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness - Of non-alloy steel: - Billets | Free |
| 7207.11.00.29 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Of rectangular (including square) cross-section, the width measuring less than twice the thickness - Of non-alloy steel: - Other | Free |
| 7207.12.00.00 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other, of rectangular (other than square) cross-section | Free |
| 7207.19.00 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other | Free |
| 7207.19.00.10 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other - Rounds | Free |
| 7207.19.00.90 | Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: - Other - Other | Free |
| 7207.20.00 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon | Free |
| 7207.20.00.10 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Blooms | Free |
| 7207.20.00.20 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Billets | Free |
| 7207.20.00.30 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Slabs, sheet bars or rounds | Free |
| 7207.20.00.90 | Semi-finished products of iron or non-alloy steel. - Containing by weight 0.25% or more of carbon - Other | Free |
| 7208.10.00.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - In coils, not further worked than hot-rolled, with patterns in relief | Free |
| 7208.25.00.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 4.75 mm or more | Free |
| 7208.26.00.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7208.27.00.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled, pickled: - Of a thickness of less than 3 mm | Free |
| 7208.36.00.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm | Free |
| 7208.37.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free |
| 7208.37.00.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width of 600 mm or more but not exceeding 1,525 mm | Free |
| 7208.37.00.20 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm | Free |
| 7208.37.00.50 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a width exceeding 1,830 mm | Free |
| 7208.38.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm | Free |
| 7208.38.00.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width of 600 mm or more but not exceeding 1,525 mm | Free |
| 7208.38.00.20 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,525 mm but not exceeding 1,830 mm | Free |
| 7208.38.00.50 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of 3 mm or more but less than 4.75 mm - Of a width exceeding 1,830 mm | Free |
| 7208.39.00.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, in coils, not further worked than hot-rolled: - Of a thickness of less than 3 mm | Free |
| 7208.40.00.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Not in coils, not further worked than hot-rolled, with patterns in relief | Free |
| 7208.51.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm | Free |
| 7208.51.00.11 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated: - Pressure vessel quality, vacuum-degassed | Free |
| 7208.51.00.12 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated: - Pressure vessel quality, not vacuum-degassed | Free |
| 7208.51.00.19 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Heat treated: - Other | Free |
| 7208.51.00.21 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width less than 1,168.4 mm | Free |
| 7208.51.00.22 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | Free |
| 7208.51.00.23 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | Free |
| 7208.51.00.24 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | Free |
| 7208.51.00.25 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 10 mm but not exceeding 15.875 mm: - Of a width exceeding 3,098.8 mm | Free |
| 7208.51.00.31 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width less than 1,168.4 mm | Free |
| 7208.51.00.32 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | Free |
| 7208.51.00.33 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | Free |
| 7208.51.00.34 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | Free |
| 7208.51.00.35 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm: - Of a width exceeding 3,098.8 mm | Free |
| 7208.51.00.41 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width less than 1,168.4 mm | Free |
| 7208.51.00.42 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | Free |
| 7208.51.00.43 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | Free |
| 7208.51.00.44 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | Free |
| 7208.51.00.45 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm: - Of a width exceeding 3,098.8 mm | Free |
| 7208.51.00.51 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width less than 1,168.4 mm | Free |
| 7208.51.00.52 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | Free |
| 7208.51.00.53 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | Free |
| 7208.51.00.54 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | Free |
| 7208.51.00.55 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm: - Of a width exceeding 3,098.8 mm | Free |
| 7208.51.00.61 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width less than 1,168.4 mm | Free |
| 7208.51.00.62 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | Free |
| 7208.51.00.63 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | Free |
| 7208.51.00.64 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | Free |
| 7208.51.00.65 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm: - Of a width exceeding 3,098.8 mm | Free |
| 7208.51.00.71 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width less than 1,168.4 mm | Free |
| 7208.51.00.72 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm | Free |
| 7208.51.00.73 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm | Free |
| 7208.51.00.74 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. - Other, not in coils, not further worked than hot-rolled: - Of a thickness exceeding 10 mm - Other, of a thickness exceeding 101.6 mm: - Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm | Free |
About HS Chapter 72
Chapter 72 of the Canadian customs tariff covers iron and steel. TariffCalc lists 100 10-digit tariff items in this chapter, with MFN (Most Favoured Nation) duty rates ranging from 0.0% to 0.0% (average 0.0%).
100 of 100 items (100%) are duty-free under MFN. Importers from countries with Canadian free trade agreements (CUSMA, CETA, CPTPP, CCFTA, CKFTA, and others) can often import at 0% when rules of origin are met.
Example calculation
| Value for duty (CAD) | $10,000 |
| MFN duty (0.0%) | $0 |
| GST 5% | $500 |
| Total landed (before freight) | $10,500 |
Simplified illustrative calculation. Provincial taxes (HST/PST/QST) and surtaxes not included.
Not sure which code in Chapter 72 fits?
Our free AI classifier uses CBSA’s GRI rules to find the right 10-digit tariff item.
Try the free AI chatFrequently asked questions
What is HS Chapter 72 in the Canadian customs tariff?▾
Chapter 72 covers iron and steel. It contains 100 10-digit tariff items in the TariffCalc database, with MFN duty rates ranging from 0.0% to 0.0%.
What is the typical duty rate for Chapter 72 imports?▾
The average MFN rate across Chapter 72 is 0.0%. The majority of items (100%) are duty-free (0%) under MFN. Free trade agreements (CUSMA, CETA, CPTPP) may reduce the rate to 0% for qualifying goods.
Do free trade agreements apply?▾
Yes. Most items in this chapter qualify for preferential rates under CUSMA (US, Mexico), CETA (EU, UK), CPTPP (Japan, Vietnam, etc.), and other Canadian FTAs. See each tariff item’s detail page for the full rate-by-agreement breakdown.
How do I calculate import duties?▾
For a CAD $10,000 shipment in this chapter at the average MFN rate (0.0%), duties would be approximately $0, plus 5% GST ($500), for a total of $10,500 before freight. Use the TariffCalc calculator for a precise calculation by tariff item, country of origin, and province.
Calculate import duties for Chapter 72 products
Get a complete duty, surtax, GST/HST, and provincial tax calculation for any tariff code in this chapter.
Canada import duty calculator