HS Code 7213.91.00.43
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter
Most Favoured Nation (MFN) Rate
Free
About HS Code 7213.91.00.43
HS code 7213.91.00.43 is a Canadian 10-digit tariff item covering Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter. It falls under Chapter 72 — Iron and steel of the Canadian Customs Tariff, within heading 7213 and subheading 7213.91. This code is used by the Canada Border Services Agency (CBSA) to determine customs duties, taxes, and regulatory compliance when you import into Canada.
The MFN (Most Favoured Nation) duty rate for 7213.91.00.43 is Free. This means no customs duty is charged regardless of the country of origin, though GST/HST and other applicable taxes still apply. 22 preferential trade agreements are available for this code, of which 22 offer duty-free access (for example: Australia Tariff, New Zealand Tariff, Commonwealth Caribbean Countries Tariff, Least Developed Country Tariff, General Preferential Tariff).
Key trade agreement eligibility: CUSMA (USA, Mexico) duty-free · CETA (EU) duty-free · CPTPP (Asia-Pacific) duty-free.
Example Calculation for 7213.91.00.43
If you import CAD $10,000 worth of goods classified under HS code 7213.91.00.43 into Canada (without a preferential trade agreement), here is the approximate cost breakdown:
| Value for Duty (VFD) | $10,000 |
| MFN Duty (Free) | $0 |
| GST (5%) | $500 |
| Total Landed Cost (approx.) | $10,500 |
Illustrative example. Does not include surtaxes, SIMA, excise duties, freight, provincial HST/PST, or trade-agreement exemptions. Use our calculator for an exact figure.
Frequently Asked Questions about HS Code 7213.91.00.43
What is HS code 7213.91.00.43?
HS code 7213.91.00.43 is a Canadian 10-digit tariff item used by the Canada Border Services Agency (CBSA) to classify imports of "Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter". It sits under Chapter 72 (Iron and steel) of the Canadian Customs Tariff.
What is the Canadian import duty rate for 7213.91.00.43?
Imports classified under HS code 7213.91.00.43 are duty-free at the MFN (Most Favoured Nation) rate. You still pay GST/HST and other applicable taxes. Use our calculator to see the full landed cost.
Can I import 7213.91.00.43 duty-free from the USA or Mexico under CUSMA?
Yes. HS code 7213.91.00.43 is duty-free under the Canada-United States-Mexico Agreement (CUSMA) when the goods originate in the US or Mexico and you provide a valid certification of origin. GST/HST still applies on import.
Does CETA apply to HS code 7213.91.00.43?
Yes. Imports of HS code 7213.91.00.43 from the European Union enter Canada duty-free under the Canada-EU Comprehensive Economic and Trade Agreement (CETA) with a valid origin declaration from the EU exporter.
What surtaxes or SIMA duties apply to HS code 7213.91.00.43?
Our calculator automatically checks retaliatory surtaxes (US steel & aluminum, Chinese EVs, etc.) and SIMA anti-dumping duties for 7213.91.00.43. Enter the country of origin in the calculator to see the complete list of duties that apply to your shipment.
Is this the right code for your product?
Our free AI classifier uses CBSA’s GRI rules to confirm or correct your classification.
Ask the AI chatPreferential Rates by Trade Agreement
22 applicable trade agreements
| Code | Trade Agreement | Rate |
|---|---|---|
| AUT | Australia Tariff | Free |
| CCoFTA | Canada-Colombia Free Trade Agreement | Free |
| CEPT | Canada-EFTA Preferential Tariff | Free |
| CETA | Canada-EU Comprehensive Economic and Trade Agreement | Free |
| CHFTA | Canada-Honduras Free Trade Agreement | Free |
| CIAT | Canada-Israel Agreement Tariff | Free |
| CJFTA | Canada-Jordan Free Trade Agreement | Free |
| CKFTA | Canada-Korea Free Trade Agreement | Free |
| CPaFTA | Canada-Panama Free Trade Agreement | Free |
| CPFTA | Canada-Peru Free Trade Agreement | Free |
| CUKTCA | Canada-United Kingdom Trade Continuity Agreement | Free |
| CT | Chile Tariff | Free |
| CCCT | Commonwealth Caribbean Countries Tariff | Free |
| CPTPP | Comprehensive and Progressive Trans-Pacific Partnership | Free |
| CRT | Costa Rica Tariff | Free |
| GPT | General Preferential Tariff | Free |
| IT | Iceland Tariff | Free |
| LDCT | Least Developed Country Tariff | Free |
| MT | Mexico Tariff | Free |
| NZT | New Zealand Tariff | Free |
| UAT | Ukraine Tariff | Free |
| UST | United States Tariff | Free |
Calculate import duties for HS code 7213.91.00.43
Get a complete duty, tax, and fee calculation for HS code 7213.91.00.43, including surtaxes, GST/HST, and provincial taxes.
Open CalculatorRelated Guides
Related HS Codes
Other codes under chapter 72
| HS Code | Description | MFN Rate |
|---|---|---|
| 7213.10.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process | Free |
| 7213.10.00.11 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Concrete reinforcing bars, of specification CSA G30.18: - Of a diameter of 12 mm or less | Free |
| 7213.10.00.12 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Concrete reinforcing bars, of specification CSA G30.18: - Of a diameter of more than 12 mm but not exceeding 17 mm | Free |
| 7213.10.00.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Concrete reinforcing bars, of specification CSA G30.18: - Of a diameter exceeding 17 mm | Free |
| 7213.10.00.90 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Containing indentations, ribs, grooves or other deformations produced during the rolling process - Other | Free |
| 7213.20.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel | Free |
| 7213.20.00.50 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel - Containing by weight 0.1% or more of lead | Free |
| 7213.20.00.90 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other, of free-cutting steel - Other | Free |
| 7213.91.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter | Free |
| 7213.91.00.41 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Tire cord-quality steel wire rod, as defined in Statistical Note 2 to this Chapter | Free |
| 7213.91.00.42 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Of cold heading quality (CHQ) steel, as defined in Statistical Note 3 to this Chapter | Free |
| 7213.91.00.49 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Not tempered or treated and not partly manufactured: - Other | Free |
| 7213.91.00.50 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Other, containing by weight less than 0.25% of carbon | Free |
| 7213.91.00.60 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Other, containing by weight 0.25% or more but less than 0.6% of carbon | Free |
| 7213.91.00.70 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Of circular cross-section measuring less than 14 mm in diameter - Other, containing by weight 0.6% or more of carbon | Free |
| 7213.99.00 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other | Free |
| 7213.99.00.11 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight less than 0.25% of carbon: - Of a diameter of 14 mm or more but less than 19 mm | Free |
| 7213.99.00.12 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight less than 0.25% of carbon: - Of a diameter of 19 mm or more but not exceeding 25.5 mm | Free |
| 7213.99.00.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight less than 0.25% of carbon: - Of a diameter exceeding 25.5 mm | Free |
| 7213.99.00.31 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. - Other: - Other - Of circular cross-section, containing by weight 0.25% or more but less than 0.6% of carbon: - Of a diameter of 14 mm or more but less than 19 mm | Free |